JINPAT Electronics Co., Ltd
JINPAT Electronics Co., Ltd Your Request Our Mission
Add to Cart
The LPK005-0502 Pan Cake Slip Ring features 5 circuits routing 2A per ring ,the 5mm unobstructed through-bore provides routing space for hydraulics, pneumatics or a concentric shaft mount. It uses advanced fiber brush technology which offers several advantages over conventional slip ring contacts including multiple points of contact per brush bundle, low contact force per fiber and low contact wear rates.
A slip ring can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary to a rotating structure. A slip ring is also called a rotary electrical interface, collector, swivel or a commutator. A slip ring can improve system performance by simplifying operations and eliminating damage-prone wires dangling from movable joints.
| Specification | |
| Circuits | 5 circuits @ 2A |
| Operating Speed | 50rpm |
| Working Temperature | -20℃~ +60℃ |
| Working Humidity | 60%RH or higher |
| Electrical: | |
| Voltage Rating | 380VAC/DC or higher |
| Dielectric Strength | ≥800V@50Hz between each circuit |
| Insulation Resistance | 50MΩ@ 500VDC |
| Electrical Noise | 30mΩ Min |
| Mechanical: | |
| Contact Material | Precious metal |
| Housing Material | Aluminum alloy |
| Lead Wire Size | Tinning AWG22/28, |
| Lead Wire Length | Standard 300mm (11.811inch) |
| Torque | ≤0.12 g·m (for reference ) |
| Protection | IP44 or higher |