JINPAT Electronics Co., Ltd
JINPAT Electronics Co., Ltd Your Request Our Mission
Add to Cart
30 Circuits Capsule Slip Ring Transferring Analog and Digital Signals with Low Loss but Long Life
LPC-30A Slip Ring Description
Capsule slip rings can transmit high current and high speed with a compact design. Its low contact resistance and optimized heat dissipation structure ensure slip ring to work stably for a long time, all of this can avoid slip ring to strike fire. It uses gold contacts at the rotary interface. Color-coded lead wires are used on both the stator and rotor for simplifying electrical connections.
The LPC-30A capsule slip ring is a standard, off-the-shelf unit that uses gold contacts at the rotary interface. Color-coded lead wires are used on both the stator and rotor for simplifying electrical connections.
Using a 90° V-groove ring design for each ring, the LPC-30A provides smoother running, lower torque and lower electrical noise than competitive slip rings. It is available in 6, 12, 18, 24, 36 circuit models.
LPC-30A Slip Ring Outline drawing
| Specifications | |
| Operating Speed | 0-300 rpm |
| Number of Circuits | 30 |
| Voltage | 240 VAC/DC |
| Current Rating | 2 amps per circuit |
| Temperature Range | -20℃ to +60℃ |
| Contact Material | Gold to Gold |
| Lead Size | 28# silver plated copper |
| Lead Length | Standard 250 mm (9.843inch) |
| Dielectric Strength | ≥500 VAC @50Hz, between each circuit |
| Insulation Resistance | 100 MΩ @ 500 VDC |
| Electrical Noise | 1mΩ Min |
LPC-30A Slip Ring Application Picture