JINPAT Electronics Co., Ltd
JINPAT Electronics Co., Ltd Your Request Our Mission
Add to Cart
6mm Through Hole Rotary Slip Ring Of 36 Circuits with 300rpm for Cranes
Description
This unit can be used to mount the slip ring on a bracket or used for routing space for hydraulics.Multi-contacting can ensure contacting reliable with low wear.It is also called a rotary electrical interface, commutator, collector, swivel or an electrical rotary joint. It can improve electromechanical capability, simplify system design, eliminate possible damage while in the rotation.
The LPC-36T slip ring capsule can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary part to a rotating part. It is a standard, off-the-shelf unit that uses gold contacts at the rotary interface. Color-coded lead wires are used on both the stator and rotor for simplifying electrical connections.
Using a 90° V-groove ring design for each ring, the LPC-36T provides a smoother running, lower torque and lower electrical noise than competitive slip rings.
Specifications
| Specifications | |
| Operating Speed | 0-200 rpm |
| Number of Circuits | 36 |
| Voltage | 240 VAC/DC |
| Current Rating | 2 amps per circuit |
| Temperature Range | -20℃ to +60℃ |
| Contact Material | Gold to Gold |
| Lead Size | 28# silver plated copper |
| Lead Lengths | Standard 250 mm (9.843inch) |
| Hole Diameter | 1.5~6mm |
| Dielectric Strength | ≥500 VAC @50Hz, between each circuit |
| Insulation Resistance | 100 MΩ @ 500 VDC |
| Electronic Noise | 1mΩ Min |
Outside Drawing
Application picture
Company Show