Specifications
Circuits | 5 circuits * RS422 Signal, 6 circuits *5A, 4 circuits* Ethernet |
Working Voltage | 380VAC/ 24VAC |
Dielectric Strength | Between circuits≥1000V@50Hz(current) 300V@50Hz(signal) |
Insulation | 500MΩ@500VDC (current) 100MΩ@300VDC (signal) |
Electrical Noise | ≤70mΩ (50rpm) |
Working Speed | 0~300 rpm |
Through Bore | Φ38.1mm |
Contact | Precious Metal |
Housing | Aluminum Alloy |
Wire Size | Lapp 10019917 wire/ Lapp 0028892 wire Simens Wires (6XV1840-2AH10) |
Wire Length | Rotor:3000mm Stator:1000mm |
Temperature | -20°C~+60°C |
Humidity | ≤60%RH |
IP | IP54 |
Competitive Advantage
- Compact design to fit in the most demanding space constraints
- Low torque minimizes system torque budget
- Rapid delivery
- long lifetime
Model selection instructions
The slip ring body shall not be used for bearing, and the wire shall not be subjected to external pulling force;
When installing the slip ring, the rotor and the stator can not be hard-wired. It is recommended to fix the slip ring on the rotating shaft with four set screws, insert the rotation-proof piece into the rotation-proof piece, and comb the wire to avoid interference or breakage of the wire; Slip rings are precision electrical components. If the environment is harsh, add protective measures or use a custom-made slip ring with a higher degree of protection.